Honda BF250 HP Outboard

Call for details.

Please call and speak to our Honda Certified Service Department about purchasing Honda 250 HP outboard motors. We will ensure you are purchasing the proper motor, options and components for your specific boat.


Quotes for installation available upon request.

honda 250 outboard

It’s Quiet

Why is the Honda BF250 so much quieter than other outboard motors? That’s the large air intake silencer.

It Sips Fuel

The BF250 runs on up to 30% less fuel at cruising speed compared to other outboards in its class – made possible by Honda’s Lean Burn Control which allows combustion of a leaner air to fuel mixture.

The Tuned Dual Exhaust also increases efficiency and performance by wrapping around the the outside of the oil pan, reducing heat build up.

The Oxygen and knock sensors correct the fuel flow and ignition curve to maximize efficiency and performance as well.


Always wear a personal flotation device while boating and read your owner's manual.


Type 4-Stroke, SOHC, 60° V6, 24 Valve
Displacement 3583cc (219 cubic ins.)
Bore & Stroke 89 X 96 mm
Full Throttle RPM Range 5300 – 6300 RPM
Rated Power 250 HP @ 5800 RPM
Cooling System Water Cooled
Fuel Delivery Programmed Fuel Injection
Ignition System MicroComputer Programmed
Starting System Electric
Exhaust Through Hub
Lubrication Wet Sump
Trim Range -4° to +16°
Tilt Range 72°


Gear Ratio 2.00:1 (24/12)
Gear Shift F-N-R
Alternator (Electric Start) 90-Amp (1118 watt)
Battery Charging Power 60 Amps (756 watts)
Propeller Optional
Power Tilt NA
Power Trim & Tilt Standard
Gas Assisted Tilt NA
Oil Pressure Alert Standard
Temperature Alert Standard
Rev-Limiter Standard
Speedometer Pickup Standard


Overall Width 660 mm/26 inches

Transom Height

L Type 508mm/20 in.
X Type 635mm/25 in.
XX Type 762mm/30 in.

Dry Weight

L-Type 272 kg – 600 lbs.
X-Type 278 kg – 613 lbs
XX-Type 282 kg – 622 lbs.