Honda BF150 HP Outboard


Please call and speak to our Honda Certified Service Department about purchasing Honda 150 HP outboard motors. We will ensure you are purchasing the proper motor, options and components for your specific vessel.


Quotes for installation available upon request.

Honda 150 Outboard


Honda 150 Outboard - BF150 - Mystic River Marina

Honda Family Values

This 150 HP outboard by Honda is an in-line four-cylinder 16-valve engine with advanced overhead cam. If that sounds familiar, it might be because it's the same platform originally designed for the Honda Accord and CR-v.

Top performance delivered by Honda's exclusive Dual-Stage inductions, while the Lean Burn Control adjusts the air-fuel mix, not only for fuel efficiency, but power as well.

The exclusive VTEC Technology makes for an exceptional fusion of power and torque while maintaining remarkable fuel efficiency.


3 Way cooling system included.

Always wear a personal flotation device while boating and read your owner's manual.


Type 4-Stroke DOHC 4 Cylinder/16 Valves
Displacement 2,354 cc (144 cubic inches)
Bore & Stroke 87 mm x 99 mm (3.4 x 3.9 inches)
Full Throttle RPM Range 5,000-6,000 RPM
Rated Power 150 HP @ 5,500 RPM
Cooling System Water Cooled
Fuel Delivery Programmed Fuel Injection
Ignition System MicroComputer Programmed
Starting System Electric
Exhaust Through Hub
Lubrication Wet Sump
Trim Range -4° to +16°
Tilt Range 72°


Gear Ratio 2.14:1
Gear Shift F-N-R
Alternator (Electric Start) 51 Amp
Battery Charging Power 30 Amp (1000 RPM), 40 Amp (2000+ RPM)
Propeller Optional
Power Tilt NA
Power Trim & Tilt Standard
Gas Assisted Tilt NA
Oil Pressure Alert Standard
Temperature Alert Standard
Rev-Limiter Standard
Speedometer Pickup Standard


Overall Width 580 mm - 22.8 inches

Transom Height

L Type 508 mm - 20 inches
X Type 635 mm - 25 inches

Dry Weight

L-Type 217 kg - 478 lbs..
X-Type 220 kg - 485 lbs.